中文  

TYLG-19R

Minimum circulation volume: 500ml; 

Number of membrane tanks: 3 

Diaphragm specification: Circular diameter 5.3 cm; 

Working temperature: 5 - 55℃ 

Material tank: 5L jacketed with controllable temperature; 

Maximum pump power: 1500W; 

Adaptable pH range: 2 - 12 (depending on the diaphragm) 

Work pressure: 0 - 7.0 MPa; 

Device dimensions: 700 (length) * 490 (width) * 550 (height) mm

Online consultation

Product Introduction

The high-pressure flat membrane experimental equipment BONA-TYLG-19R adopts cross-flow filtration mode. The material flows at high speed on the surface of the organic membrane and a certain pressure is provided to enable small molecules to pass vertically through the membrane surface, while the large molecules that are retained are washed away. The high-pressure flat membrane experimental equipment produced by Wuhan Bo-na can be equipped with microfiltration membranes, ultrafiltration membranes, nanofiltration membranes, reverse osmosis membranes, seawater/brackish water desalination membranes, and is suitable for various membrane sheet testing and research, as well as the filtration of small amounts of materials. It is widely used in fields such as biology, pharmaceuticals, food, chemical engineering, and environmental protection, for process experiments such as concentration, separation, purification, clarification, and sterilization of liquid materials. Different sized circular or square membrane pools of various sizes can be customized according to experimental requirements.

Product Features

The membrane pool is designed as a circle, with a 120-degree opening angle. It features a special flow channel and is equipped with a water distributor, which ensures that the pressure and flow at every point of the membrane are stable and consistent. 

2. The membrane pool is constructed in a parallel structure, allowing experiments to be conducted using any one or several of the membranes. Different membranes can be installed simultaneously for testing, ensuring the consistency of the feed flow rate and conditions. 

3. The design is based on fluid dynamics, ensuring the tangential flow and turbulence in the membrane pool, and guaranteeing the reliability and stability of the test data. 

4. Microfiltration membranes, ultrafiltration membranes, nanofiltration membranes and reverse osmosis membranes can be installed. It is suitable for membrane testing research and filtration experiments involving small amounts of liquid. 

5. The pump machine is equipped with a pressure sensing system and a variable frequency control system. It can adjust the pressure and flow rate by variable frequency, set the maximum pressure, and achieve automatic protection against overpressure. The operation process is absolutely safe. 

6. A constant pressure control system is adopted. During the testing process, the constant pressure control system can be used to maintain a constant pressure, ensuring that the test pressure remains stable. 

7. Equipped with an automatic overpressure protection function, it will automatically shut down in case of overpressure, ensuring safety during use. 

8. Equipped with a temperature control module, it will automatically shut down when the temperature exceeds the limit, ensuring the stability of the materials during the experiment; it can set high and low temperature alarms and automatically start or stop; it can also be set with a timed start and stop function. 

9. Pressure and temperature sensors are equipped for the device. It is also equipped with a data transmission system. The device has storage capabilities and a USB drive. Data can be stored to the USB drive by clicking on the screen, and data can also be copied. The device can also be directly connected to a computer for data recording and storage. 

10. The power supply of the equipment is controlled by two switches. When the low-voltage power is in operation, it can fully ensure the safety of both the equipment and personnel. 

11. All stainless steel welding is carried out using automatic argon gas protection, with single-sided welding and double-sided forming. The inner and outer surfaces of the pipeline have excellent quality, and there are no welding points in the pipelines in contact with the materials, ensuring the equipment's pressure resistance and corrosion resistance. The equipment is easy to operate, clean and hygienic, and safe and reliable.


Basic configuration

美国进口万纳尔柱塞隔膜泵一台、前置过滤器一个、SUS316L 膜池 3个、压力传感器 4套、温度传感器一套、物料罐一套、压力调节阀 4个、设备支架、连环卡节、管道及 其连接件若干,超压自动保护系统一套,超温自动保护系统一套、变频控制系统 一套、数据传输系统一套,恒压控制系统一套。

Typical application fields

Pharmacy

Pharmacy

Dissolution and concentration of antibiotic resin analysis solution 

Vitamin concentration


Food

Food

Separation and purification of oligosaccharides and starch sugars 

Juice concentration and separation, plant extraction


Extracting solution

Extracting solution

Clarification and filtration of animal and plant catchments

Condiments

Condiments

The sterilization, clarification and filtration of soy sauce, vinegar, etc.

Recovery process of mother liquor

Recovery process of mother liquor

Removal of impurities in the monosodium glutamate solution 

Removal of impurities such as glucose crystallization mother liquor



Dyestuff

Dyestuff

Desalination and concentration, replacing salting out and acid precipitation for amino acid separation, de-colorization and impurity removal, concentration, and desalination

Some using units

Some using units

Tsinghua University

Peking University

Beijing Institute of Technology

Fudan University

Zhejiang University

Go to Jiaotong University for school.

Xi'an Jiaotong University

Sichuan University

Sun Yat-Sen University

Nanjing University

University of Chinese Academy of Sciences

Northeast Normal University

Harbin Institute of Technology

Southeast University

Nankai University

Honghu City Xinhongye Food Co., Ltd.

Honghu City Jingli Aquatic Products and Food Co., Ltd.

Jinweihuang Co., Ltd.

Shenyang Sinochem New Materials Technology Co., Ltd.

Shandong Zhongke Henglian Bio-based Materials Co., Ltd.

Jilin Kale Ying Pharmaceutical Chemistry Co., Ltd.

Hebei Yuan Da Jiufu Biotechnology Co., Ltd.

Guangdong Yifang Pharmaceutical Co., Ltd.

Nanjing Vazyme Biotech Co., Ltd.

Shandong Xinhecheng Amino Acids Co., Ltd.

Xi'an Wanlong Pharmaceutical Co., Ltd.

Hunan Warner Pharmaceutical Factory Chiral Drug Co., Ltd.

Sichuan Meidaikang Huakang Pharmaceutical Co., Ltd.

Chongqing Kailin Pharmaceutical Co., Ltd.

Jingjing Pharmaceutical Co., Ltd.

Shandong Qidu Pharmaceutical Co., Ltd.

Wuhan Yeasen Biotechnology Co., Ltd.

Shanghai Coastal Technology Co., Ltd.

Shaanxi Bai Lu Pharmaceutical Co., Ltd.

Porton Fine Chemicals Ltd

Jingzhou Jingzhuang Mingzhu Food Co., Ltd.

Hubei Laker Food Technology Co., Ltd.

Shandong Asde Technology Co., Ltd.

Shandong Sinocera Functional Material Co.,Ltd

Quzhou Huayou Cobalt New Materials Co., Ltd.

Huaxi Biotechnology (Tianjin) Co., Ltd.

Shandong Bailongchuangyuan Biotechnology Co., Ltd.

Shandong Lihai Run Biotechnology Co., Ltd.

Jiangsu Chuangjian Medical Technology Co., Ltd.

Jiangsu Donghui Biotechnology Co., Ltd.

Texas Huoyang Biotechnology Co., Ltd.

Changzhou Yulan Biotechnology Co., Ltd.

Anhui Nu Jian Biotechnology Co., Ltd.

Baikai Sheng (Jiangsu) Biotechnology Co., Ltd.

Shandong Fuyang Biotechnology Co., Ltd.

Zhongke Guosheng (Hangzhou) Technology Co., Ltd.

Guangzhou Yuanmei Biotechnology Co., Ltd.

Zhejiang Xingyue Biotechnology Co., Ltd.

Shandong JiaoZhuo Furida Biotechnology Co., Ltd.

Suzhou TimeAlgae Pharmaceuticals Co., Ltd.

Qianjiang Liwu Aquatic Products and Food Co., Ltd.

Inner Mongolia Mengniu Dairy (Group) Co., Ltd.

Ya'an Bitu High-Tech Materials Co., Ltd.

Institute of Jiangxi Rare Earths, Chinese Academy of Sciences

Weifu High-Technology Group Co., Ltd

Bonner's technological advantages

Independently completed multiple domestic and international membrane equipment project engineering, with rich experience.

Independently completed multiple domestic and international membrane equipment project engineering, with rich experience.

We have a group of senior engineers specializing in membrane engineering applications, with many years of technical development and engineering practice experience.

We have a group of senior engineers specializing in membrane engineering applications, with many years of technical development and engineering practice experience.

We offer professional technical support and can provide on-site guidance for installation and commissioning.

We offer professional technical support and can provide on-site guidance for installation and commissioning.

A perfect customer service system and regular follow-up visits ensure the quality of the equipment.

A perfect customer service system and regular follow-up visits ensure the quality of the equipment.

The company has a service center that provides you with fast, efficient and cost-effective instrument repair services.

The company has a service center that provides you with fast, efficient and cost-effective instrument repair services.