中文  

BNCM3-2-M

Adaptation to working temperature: 0 - 70℃ 

Material tank: 100L (customizable) 

Minimum circulation volume: 20L; 

Adaptation pH range: 0 - 14; 

Filtering rate: 20 - 100 L/H (depending on the material conditions) 

Single core filtration area: 0.286 m²; 

Filter area: 1.7 square meters per unit; 

Number of membrane modules: 2; 

Membrane element dimensions: 1200mm ± 0.2mm (length), φ30mm (inner diameter); 

Filter component material: SS304; 

Operating pressure: 0 - 0.6 Mpa; 

Power: 2.3KW; 

Control mode: Manual control / Automatic control; 

Power supply voltage: Three-phase / 3380V / 50Hz; 

Overall dimensions: 1500 (length) × 900 (width) × 2000 (height) mm


Online consultation

Product Introduction

The pilot-scale ceramic membrane filtration system (BNCM3-2-M) can be equipped with different pore-sized ceramic membrane elements (UF, MF), and is widely used in fields such as biology, pharmaceuticals, food, chemical engineering, and environmental protection, for process experiments involving the separation, purification, clarification, and sterilization of liquid materials. It can replace traditional processes such as plate-and-frame filtration, centrifugal separation, solvent extraction, natural sedimentation, and diatomite filtration, and can reduce the amount of activated carbon used during decolorization, improve the adsorption efficiency during resin adsorption, and extend the regeneration cycle of ion exchange resins. The adoption of ceramic membrane filtration separation technology has the advantages of fast product filtration speed, high yield, good quality, low operating cost and long service life.

Product Features

The system adopts an integrated structure design and a skid-mounted structure. The equipment surface has no hygiene dead corners, meeting the GMP requirements. 

2. The system is equipped with security filters, which can prevent damage to the membrane core caused by foreign substances mixed in the materials. 

3. Install the heat exchanger and use the externally connected circulating cooling water to control the temperature of the materials within the system. 

4. Equipped with pressure, temperature and other instruments, it can achieve online monitoring, system protection and alarm functions. 

5. The system is equipped with automatic protection devices and an emergency stop button. When the button is pressed, the equipment will immediately stop running, and when reset, it will enter a standby state. 

6. If the membrane inlet pressure is higher than the set value (the parameters can be adjusted for setting, such as setting 0.5 MPa), the system will be automatically shut down and an alarm will sound for protection. 

7. When the material temperature exceeds the upper limit set value or falls below the lower limit set value (the upper and lower limit parameters can be adjusted), the system will be automatically shut down and an alarm will be triggered for protection.


Basic configuration

One circulating pump, two membrane modules, six ceramic membrane elements, one backwashing system, one circulation tank, one heat exchanger, one set of clear liquid piping, one set of concentrated liquid piping, one basic electrical control cabinet (equipped with temperature protection system and pressure protection system), several equipment supports, pipes, valves and their connecting parts.

Typical application fields

Food industry

Food industry

Clarification and concentration of beverages and juices; 

Fruit wine processing includes sterilization and clarification, as well as acid removal, etc. 

Dairy product production, sugar industry, soy sauce, 

The clarification of vinegar, etc.


Pharmaceuticals industry

Pharmaceuticals industry

Sterilization, extraction of pharmaceutical products, 

Separation, purification, concentration, desalination, 

Solvent replacement, etc.



Health care industry

Health care industry

Production of animal peptides and plant peptides; 

Health tea, coffee powder clarification and concentration; 

Vitamin separation, impurity removal from health tonics, etc.


The blood products industry

The blood products industry

Plasma protein concentration, antiviral immunoglobulin 

Protein purification, production of artificial blood;


Biotechnology industry

Biotechnology industry

Plant extract liquid concentration, natural pigment filtration concentration, honeysuckle impurity removal filtration, fermentation liquid concentration and refinement, enzyme preparation purification concentration, amino acid filtration concentration, etc.

Cosmetics industry

Cosmetics industry

Collagen grading, hyaluronic acid purification 

Production of plant essential oils, purification of natural pigments 

Purification of plant spices and removal of impurities for antioxidant properties.


Some using units

Some using units

Tsinghua University

Peking University

Beijing Institute of Technology

Fudan University

Zhejiang University

Go to Jiaotong University for school.

Xi'an Jiaotong University

Sichuan University

Sun Yat-Sen University

Nanjing University

University of Chinese Academy of Sciences

Northeast Normal University

Harbin Institute of Technology

Southeast University

Nankai University

Honghu City Xinhongye Food Co., Ltd.

Honghu City Jingli Aquatic Products and Food Co., Ltd.

Jinweihuang Co., Ltd.

Shenyang Sinochem New Materials Technology Co., Ltd.

Shandong Zhongke Henglian Bio-based Materials Co., Ltd.

Jilin Kale Ying Pharmaceutical Chemistry Co., Ltd.

Hebei Yuan Da Jiufu Biotechnology Co., Ltd.

Guangdong Yifang Pharmaceutical Co., Ltd.

Nanjing Vazyme Biotech Co., Ltd.

Shandong Xinhecheng Amino Acids Co., Ltd.

Xi'an Wanlong Pharmaceutical Co., Ltd.

Hunan Warner Pharmaceutical Factory Chiral Drug Co., Ltd.

Sichuan Meidaikang Huakang Pharmaceutical Co., Ltd.

Chongqing Kailin Pharmaceutical Co., Ltd.

Jingjing Pharmaceutical Co., Ltd.

Shandong Qidu Pharmaceutical Co., Ltd.

Wuhan Yeasen Biotechnology Co., Ltd.

Shanghai Coastal Technology Co., Ltd.

Shaanxi Bai Lu Pharmaceutical Co., Ltd.

Porton Fine Chemicals Ltd

Jingzhou Jingzhuang Mingzhu Food Co., Ltd.

Hubei Laker Food Technology Co., Ltd.

Shandong Asde Technology Co., Ltd.

Shandong Sinocera Functional Material Co.,Ltd

Quzhou Huayou Cobalt New Materials Co., Ltd.

Huaxi Biotechnology (Tianjin) Co., Ltd.

Shandong Bailongchuangyuan Biotechnology Co., Ltd.

Shandong Lihai Run Biotechnology Co., Ltd.

Jiangsu Chuangjian Medical Technology Co., Ltd.

Jiangsu Donghui Biotechnology Co., Ltd.

Texas Huoyang Biotechnology Co., Ltd.

Changzhou Yulan Biotechnology Co., Ltd.

Anhui Nu Jian Biotechnology Co., Ltd.

Baikai Sheng (Jiangsu) Biotechnology Co., Ltd.

Shandong Fuyang Biotechnology Co., Ltd.

Zhongke Guosheng (Hangzhou) Technology Co., Ltd.

Guangzhou Yuanmei Biotechnology Co., Ltd.

Zhejiang Xingyue Biotechnology Co., Ltd.

Shandong JiaoZhuo Furida Biotechnology Co., Ltd.

Suzhou TimeAlgae Pharmaceuticals Co., Ltd.

Qianjiang Liwu Aquatic Products and Food Co., Ltd.

Inner Mongolia Mengniu Dairy (Group) Co., Ltd.

Ya'an Bitu High-Tech Materials Co., Ltd.

Institute of Jiangxi Rare Earths, Chinese Academy of Sciences

Weifu High-Technology Group Co., Ltd

Bonner's technological advantages

Independently completed multiple domestic and international membrane equipment project engineering, with rich experience.

Independently completed multiple domestic and international membrane equipment project engineering, with rich experience.

We have a group of senior engineers specializing in membrane engineering applications, with many years of technical development and engineering practice experience.

We have a group of senior engineers specializing in membrane engineering applications, with many years of technical development and engineering practice experience.

We offer professional technical support and can provide on-site guidance for installation and commissioning.

We offer professional technical support and can provide on-site guidance for installation and commissioning.

A perfect customer service system and regular follow-up visits ensure the quality of the equipment.

A perfect customer service system and regular follow-up visits ensure the quality of the equipment.

The company has a service center that provides you with fast, efficient and cost-effective instrument repair services.

The company has a service center that provides you with fast, efficient and cost-effective instrument repair services.