Minimum circulation volume: 0.2L;
Work pressure: 0 - 2.0 MPa;
Working temperature: 5 - 55℃
pH value: 2 - 12;
Number of membrane shells: 2;
Material tank: 1.1L (with jacket for temperature control)
Pump power: 500W;
Filtering rate: 0.5 - 10 L/H;
Device dimensions: 530 (length) × 430 (width) × 450 (height) mm
The organic membrane separation experimental machine BONA-GM-18R adopts the cross-flow filtration method. The material flows at high speed on the surface of the organic membrane and a certain pressure is provided to enable small molecules to pass through the membrane surface vertically, while the large molecules that are retained are washed away.
By precisely configuring the pump's flow range according to the membrane surface flow rate of the sanitary membrane elements, it is possible to ensure that the experimental parameters selected for this equipment can be directly applied to industrial production.
2. The membrane housing is designed based on fluid dynamics, ensuring the flow velocity on the membrane surface and guaranteeing the stability and reliability of the test data.
3. A variable-frequency control system is adopted, which enables the regulation and control of the feed flow rate.
4. The power supply of the equipment is controlled by two switches. When the low-voltage power is in operation, it can fully ensure the safety of both the equipment and personnel.
5. Equipped with an automatic overpressure protection function, it will automatically shut down in case of overpressure; ensuring safety during use.
6. Equipped with a temperature control module, it will automatically shut down when the temperature exceeds the limit, ensuring the stability of the materials during the experiment; it can set high and low temperature alarms and automatically start or stop; it can also be set with a timed start and stop function.
7. It can be equipped with other types of microfiltration, ultrafiltration and nanofiltration membrane elements.
8. Equipped with a material switching valve, it can be connected to an external large-capacity material tank through the switching valve, meeting the filtration requirements for large volumes of materials.
9. All stainless steel welding is carried out using automatic argon gas protection, with single-sided welding and double-sided forming. There are no welding points on the pipelines in contact with the materials, ensuring the equipment's pressure resistance and corrosion resistance. The inner and outer surfaces of the equipment pipelines have excellent quality, the operation is simple, clean and hygienic, and the equipment is safe and reliable.
One feed pump, one SUS316L stainless steel membrane module, one set of pressure sensors, one set of temperature sensors, one material tank, one pressure regulating valve, equipment brackets, interlocking couplings, several pipes and their connecting parts, an overpressure automatic protection system, an overtemperature automatic protection system, and 2 membrane elements.
Dissolution and concentration of antibiotic resin analysis solution
Vitamin concentration
Separation and purification of oligosaccharides and starch sugars
Juice concentration and separation, plant extraction
Clarification and filtration of animal and plant catchments
The sterilization, clarification and filtration of soy sauce, vinegar, etc.
Removal of impurities in the monosodium glutamate solution
Removal of impurities such as glucose crystallization mother liquor
Desalination and concentration, replacing salting out and acid precipitation for amino acid separation, de-colorization and impurity removal, concentration, and desalination
Tsinghua University
Peking University
Beijing Institute of Technology
Fudan University
Zhejiang University
Go to Jiaotong University for school.
Xi'an Jiaotong University
Sichuan University
Sun Yat-Sen University
Nanjing University
University of Chinese Academy of Sciences
Northeast Normal University
Harbin Institute of Technology
Southeast University
Nankai University
Honghu City Xinhongye Food Co., Ltd.
Honghu City Jingli Aquatic Products and Food Co., Ltd.
Jinweihuang Co., Ltd.
Shenyang Sinochem New Materials Technology Co., Ltd.
Shandong Zhongke Henglian Bio-based Materials Co., Ltd.
Jilin Kale Ying Pharmaceutical Chemistry Co., Ltd.
Hebei Yuan Da Jiufu Biotechnology Co., Ltd.
Guangdong Yifang Pharmaceutical Co., Ltd.
Nanjing Vazyme Biotech Co., Ltd.
Shandong Xinhecheng Amino Acids Co., Ltd.
Xi'an Wanlong Pharmaceutical Co., Ltd.
Hunan Warner Pharmaceutical Factory Chiral Drug Co., Ltd.
Sichuan Meidaikang Huakang Pharmaceutical Co., Ltd.
Chongqing Kailin Pharmaceutical Co., Ltd.
Jingjing Pharmaceutical Co., Ltd.
Shandong Qidu Pharmaceutical Co., Ltd.
Wuhan Yeasen Biotechnology Co., Ltd.
Shanghai Coastal Technology Co., Ltd.
Shaanxi Bai Lu Pharmaceutical Co., Ltd.
Porton Fine Chemicals Ltd
Jingzhou Jingzhuang Mingzhu Food Co., Ltd.
Hubei Laker Food Technology Co., Ltd.
Shandong Asde Technology Co., Ltd.
Shandong Sinocera Functional Material Co.,Ltd
Quzhou Huayou Cobalt New Materials Co., Ltd.
Huaxi Biotechnology (Tianjin) Co., Ltd.
Shandong Bailongchuangyuan Biotechnology Co., Ltd.
Shandong Lihai Run Biotechnology Co., Ltd.
Jiangsu Chuangjian Medical Technology Co., Ltd.
Jiangsu Donghui Biotechnology Co., Ltd.
Texas Huoyang Biotechnology Co., Ltd.
Changzhou Yulan Biotechnology Co., Ltd.
Anhui Nu Jian Biotechnology Co., Ltd.
Baikai Sheng (Jiangsu) Biotechnology Co., Ltd.
Shandong Fuyang Biotechnology Co., Ltd.
Zhongke Guosheng (Hangzhou) Technology Co., Ltd.
Guangzhou Yuanmei Biotechnology Co., Ltd.
Zhejiang Xingyue Biotechnology Co., Ltd.
Shandong JiaoZhuo Furida Biotechnology Co., Ltd.
Suzhou TimeAlgae Pharmaceuticals Co., Ltd.
Qianjiang Liwu Aquatic Products and Food Co., Ltd.
Inner Mongolia Mengniu Dairy (Group) Co., Ltd.
Ya'an Bitu High-Tech Materials Co., Ltd.
Institute of Jiangxi Rare Earths, Chinese Academy of Sciences
Weifu High-Technology Group Co., Ltd
Independently completed multiple domestic and international membrane equipment project engineering, with rich experience.
We have a group of senior engineers specializing in membrane engineering applications, with many years of technical development and engineering practice experience.
We offer professional technical support and can provide on-site guidance for installation and commissioning.
A perfect customer service system and regular follow-up visits ensure the quality of the equipment.
The company has a service center that provides you with fast, efficient and cost-effective instrument repair services.
