中文  

TYLG-19

Minimum circulation volume: 0.5L; 

Allowable operating temperature: 5 - 55℃; 

PH application range: 2 - 12; 

Work pressure: 0 - 6.5 MPa; 

Material tank: 1.1L (with jacket for temperature control) 

Flow rate: 30 - 90 liters per hour; 

Device dimensions: 640 (length) x 440 (width) x 535 (height) mm

Online consultation

Product Introduction

The high-pressure flat membrane experimental equipment (TYLG-19) produced by Wuhan Bona can be equipped with microfiltration membranes, ultrafiltration membranes, nanofiltration membranes, reverse osmosis membranes, and seawater/brackish water desalination membranes. It is suitable for various membrane testing and research, as well as the filtration of small amounts of materials. It is widely used in fields such as biology, pharmaceuticals, food, chemical engineering, and environmental protection, for process experiments such as concentration, separation, purification, clarification, and sterilization of liquid materials. Customized circular or square membrane pools of different sizes can be provided according to the experimental requirements.

Product Features

The inner and outer surfaces of the pipeline are of high quality. The equipment's material contact with the pipeline has no welding points at all, ensuring the equipment's pressure resistance and corrosion resistance. The operation is simple, the hygiene is good, and it is safe and reliable. 

2. The equipment is controlled by two pumps. The microfiltration and ultrafiltration membranes can only activate the auxiliary pump, effectively ensuring the different control of flow and pressure during high and low pressure tests. 

3. The pump machine is equipped with a pressure sensing system and a variable frequency control system. It can adjust the pressure and flow rate by variable frequency, set the desired pressure, and achieve automatic protection against overpressure. The operation process is extremely safe. 

4. The membrane pool is designed as three square structures, with a special flow channel. This ensures that the pressure and flow rate at every point of the membrane are stable and consistent. 

5. The design is based on fluid dynamics to ensure the tangential flow and turbulence in the membrane pool, thereby guaranteeing the reliability and stability of the test data. 

6. It can be equipped with microfiltration membranes, ultrafiltration membranes, nanofiltration membranes and reverse osmosis membranes. It is suitable for membrane testing research and filtration experiments involving small amounts of liquid materials. 

7. By using a jacketed material tank, it is possible to connect a high/low temperature circulation device for temperature control. 

8. The equipment is equipped with a digital pressure sensor with an accuracy of 0.4% FS. It can accurately record both high-pressure and low-pressure data, ensuring the accuracy of the data and overcoming the defect of low accuracy of mechanical pressure gauges. 

9. The equipment can be set with a pressure value. Through the constant pressure control system, it can achieve automatic constant pressure control, preventing the equipment from automatically increasing the pressure during the testing process. 

10. The equipment pressure and temperature are displayed digitally. The sensor values are shown in a screen display mode, which can be centrally displayed. According to the need, they can be uploaded to a computer to record the data during the testing process. 

11. Equipped with an automatic over-temperature protection system, which will automatically trigger an alarm and shut down the machine when the temperature exceeds the limit. 

12. The membrane pool is constructed in a parallel structure. Any one or several of them can be used for experiments. Different membrane sheets can be installed simultaneously for testing, ensuring the consistency of the feed flow rate and conditions.


Basic configuration

Dual pump control (auxiliary pump: one electromagnetic feeding pump, main pump: one high-pressure piston pump), three SUS316L membrane tanks, five sets of pressure sensors, four pressure regulating valves, one material tank, one frame, one overpressure control system, one automatic overtemperature protection system, one variable frequency digital control system, one constant pressure control system, and several pipelines and their connecting parts. 

Optional diaphragm models: 

Microfiltration membrane elements: 0.05um, 0.1um, 0.2um, 0.3um, 0.45um

Ultrafiltration membrane elements: 1000D, 2000D, 3000D, 5000D, 8000D, 10KD, 20KD, 30KD, 50KD, 70KD, 100KD, 300KD, 500KD, 800KD

Nanofiltration membrane elements: 100D, 150D, 200D, 300D, 500D, 600D, 800D

Reverse osmosis elements: RO1, RO2, RO3, RO4, RO5, RO6, RO7, SW30, BW30

Typical application fields

Pharmacy

Pharmacy

Dissolution and concentration of antibiotic resin analysis solution 

Vitamin concentration


Food

Food

Separation and purification of oligosaccharides and starch sugars 

Juice concentration and separation, plant extraction


Extracting solution

Extracting solution

Clarification and filtration of animal and plant catchments

Condiments

Condiments

The sterilization, clarification and filtration of soy sauce, vinegar, etc.

Recovery process of mother liquor

Recovery process of mother liquor

Removal of impurities in the monosodium glutamate solution 

Removal of impurities such as glucose crystallization mother liquor



Dyestuff

Dyestuff

Desalination and concentration, replacing salting out and acid precipitation for amino acid separation, de-colorization and impurity removal, concentration, and desalination

Some using units

Some using units

Tsinghua University

Peking University

Beijing Institute of Technology

Fudan University

Zhejiang University

Go to Jiaotong University for school.

Xi'an Jiaotong University

Sichuan University

Sun Yat-Sen University

Nanjing University

University of Chinese Academy of Sciences

Northeast Normal University

Harbin Institute of Technology

Southeast University

Nankai University

Honghu City Xinhongye Food Co., Ltd.

Honghu City Jingli Aquatic Products and Food Co., Ltd.

Jinweihuang Co., Ltd.

Shenyang Sinochem New Materials Technology Co., Ltd.

Shandong Zhongke Henglian Bio-based Materials Co., Ltd.

Jilin Kale Ying Pharmaceutical Chemistry Co., Ltd.

Hebei Yuan Da Jiufu Biotechnology Co., Ltd.

Guangdong Yifang Pharmaceutical Co., Ltd.

Nanjing Vazyme Biotech Co., Ltd.

Shandong Xinhecheng Amino Acids Co., Ltd.

Xi'an Wanlong Pharmaceutical Co., Ltd.

Hunan Warner Pharmaceutical Factory Chiral Drug Co., Ltd.

Sichuan Meidaikang Huakang Pharmaceutical Co., Ltd.

Chongqing Kailin Pharmaceutical Co., Ltd.

Jingjing Pharmaceutical Co., Ltd.

Shandong Qidu Pharmaceutical Co., Ltd.

Wuhan Yeasen Biotechnology Co., Ltd.

Shanghai Coastal Technology Co., Ltd.

Shaanxi Bai Lu Pharmaceutical Co., Ltd.

Porton Fine Chemicals Ltd

Jingzhou Jingzhuang Mingzhu Food Co., Ltd.

Hubei Laker Food Technology Co., Ltd.

Shandong Asde Technology Co., Ltd.

Shandong Sinocera Functional Material Co.,Ltd

Quzhou Huayou Cobalt New Materials Co., Ltd.

Huaxi Biotechnology (Tianjin) Co., Ltd.

Shandong Bailongchuangyuan Biotechnology Co., Ltd.

Shandong Lihai Run Biotechnology Co., Ltd.

Jiangsu Chuangjian Medical Technology Co., Ltd.

Jiangsu Donghui Biotechnology Co., Ltd.

Texas Huoyang Biotechnology Co., Ltd.

Changzhou Yulan Biotechnology Co., Ltd.

Anhui Nu Jian Biotechnology Co., Ltd.

Baikai Sheng (Jiangsu) Biotechnology Co., Ltd.

Shandong Fuyang Biotechnology Co., Ltd.

Zhongke Guosheng (Hangzhou) Technology Co., Ltd.

Guangzhou Yuanmei Biotechnology Co., Ltd.

Zhejiang Xingyue Biotechnology Co., Ltd.

Shandong JiaoZhuo Furida Biotechnology Co., Ltd.

Suzhou TimeAlgae Pharmaceuticals Co., Ltd.

Qianjiang Liwu Aquatic Products and Food Co., Ltd.

Inner Mongolia Mengniu Dairy (Group) Co., Ltd.

Ya'an Bitu High-Tech Materials Co., Ltd.

Institute of Jiangxi Rare Earths, Chinese Academy of Sciences

Weifu High-Technology Group Co., Ltd

Bonner's technological advantages

Independently completed multiple domestic and international membrane equipment project engineering, with rich experience.

Independently completed multiple domestic and international membrane equipment project engineering, with rich experience.

We have a group of senior engineers specializing in membrane engineering applications, with many years of technical development and engineering practice experience.

We have a group of senior engineers specializing in membrane engineering applications, with many years of technical development and engineering practice experience.

We offer professional technical support and can provide on-site guidance for installation and commissioning.

We offer professional technical support and can provide on-site guidance for installation and commissioning.

A perfect customer service system and regular follow-up visits ensure the quality of the equipment.

A perfect customer service system and regular follow-up visits ensure the quality of the equipment.

The company has a service center that provides you with fast, efficient and cost-effective instrument repair services.

The company has a service center that provides you with fast, efficient and cost-effective instrument repair services.